This is a guide to diagnose Goldshell ASIC miner error codes and gives the soultions.
Verify your device is properly plugged in and connected to the Internet if you are experiencing problems with your Goldshell ASIC miner. If that’s not the issue, we will diagnose it using the lights on the device. Goldshell miners conveniently have a built-in light on their equipment that can display a variety of error codes. Use the guides below to diagnose any problems you are having with your miner.
Box Series Miner Indicators
Use the below light codes to diagnose your Goldshell Box Series miner (Goldshell Mini Doge, Goldshell KD Box, Goldshell SC Box, Goldshell CK Box, Goldshell HS Box, Goldshell STC, Goldshell LB Box, and Goldshell Pro Versions) issues:
| Light Pattern | Miner Status | Solution |
| Green/Blue Light Flashing Fast | Miner is Working Properly! | N/A |
| Red Flashing Fast | Abnormal Fan | Replace or fix the fan on the device |
| Red Flashing Slow | Network Issue | Check/Restore your Internet connection |
| Solid Red | Miner is overheating | Check air circulation and temps |
| Solid Red + Solid Green | Needs a reset | Press the Reset button |
| Solid Red + Green/Blue Flashing | Hashboard failed to start | Try to reset/restart |
| Solid Green | Miner is idle | Try to resetrestart |
| Solid Green + Flashing Red | Power Supply not working | Check PSU connection or replace PSU |
Big ASIC Miner Indicator Codes
Use the below light codes to diagnose your Goldshell professional miner (Goldshell KD2, Goldshell KD5, Goldshell CK5, Goldshell HS5, Goldshell LS3SE, Goldshell LT5, Etc.) issues:
| Light Pattern | Miner Status | Solution |
| Red Light Flashing Slowly | Network Issue | Check/Restore your Internet Connection |
| Red Light Flashing Fast | Abnormal Fan | Replace or fix the fan on the device |
| Solid Red | Miner is Overheating | Check the air circulation and temps |
| Solid Red + Green Light Flashing | Failed to start hashboard | Try to reset/restart |
| Solid Green | Miner is Idle | Try to reset/restart |
| Green Light Flashing Fast | Working Properly | N/A |
Connection Status Check
The miner’s IP address ought to allow you to connect to it. With the help of WhosOnMyWifi, you can find the miner’s IP address. Once you have it, use your web browser to search for the miner’s IP. It should populate a dashboard that looks like this! The dashboard allows you to track and verify the status of numerous items.
We can use Goldshell’s software to check for stability issues once you’re certain there isn’t a connection problem.
Stability Issues
The best course of action is to update the software if you’re experiencing stability issues because that might be the cause.
How to Update Your Software
- Visit our firmware page. You can find every Goldshell miner here.
- To find the IP address, log in to the miner.
- “Unlock the miner” is located in the upper left corner.
Username: admin
Password: 123456789
4. After unlocking your miner, go to System, click Update Firmware, and then choose the software.
Let the miner sit until it comes back online after you’ve finished. Don’t touch anything. It’s expected that you will hear the fans spinning. The miner’s reset process can take anywhere between five and ten minutes.
In order to have Internet access when the device turns on if you’re using WiFi to operate the miner, you must plug in an ethernet cable.
